openpilot/selfdrive/ui/translations/main_es.ts

<?xml version="1.0" encoding="utf-8"?>
<!DOCTYPE TS>
<TS version="2.1" language="es_ES">
<context>
    <name>AbstractAlert</name>
    <message>
        <source>Close</source>
        <translation>Cerrar</translation>
    </message>
    <message>
        <source>Reboot and Update</source>
        <translation>Reiniciar y Actualizar</translation>
    </message>
</context>
<context>
    <name>AdvancedNetworking</name>
    <message>
        <source>Back</source>
        <translation>Volver</translation>
    </message>
    <message>
        <source>Enable Tethering</source>
        <translation>Activar Tether</translation>
    </message>
    <message>
        <source>Tethering Password</source>
        <translation>Contraseña de Tethering</translation>
    </message>
    <message>
        <source>EDIT</source>
        <translation>EDITAR</translation>
    </message>
    <message>
        <source>Enter new tethering password</source>
        <translation>Nueva contraseña de tethering</translation>
    </message>
    <message>
        <source>IP Address</source>
        <translation>Dirección IP</translation>
    </message>
    <message>
        <source>Enable Roaming</source>
        <translation>Activar Roaming</translation>
    </message>
    <message>
        <source>APN Setting</source>
        <translation>Configuración de APN</translation>
    </message>
    <message>
        <source>Enter APN</source>
        <translation>Insertar APN</translation>
    </message>
    <message>
        <source>leave blank for automatic configuration</source>
        <translation>dejar en blanco para configuración automática</translation>
    </message>
    <message>
        <source>Cellular Metered</source>
        <translation>Plano de datos limitado</translation>
    </message>
    <message>
        <source>Hidden Network</source>
        <translation>Red Oculta</translation>
    </message>
    <message>
        <source>CONNECT</source>
        <translation>CONECTAR</translation>
    </message>
    <message>
        <source>Enter SSID</source>
        <translation>Ingrese SSID</translation>
    </message>
    <message>
        <source>Enter password</source>
        <translation>Ingrese contraseña</translation>
    </message>
    <message>
        <source>for &quot;%1&quot;</source>
        <translation>para &quot;%1&quot;</translation>
    </message>
    <message>
        <source>Prevent large data uploads when on a metered cellular connection</source>
        <translation>Evite cargas de grandes cantidades de datos cuando utilice una conexión celular medida</translation>
    </message>
    <message>
        <source>default</source>
        <translation>por defecto</translation>
    </message>
    <message>
        <source>metered</source>
        <translation>medido</translation>
    </message>
    <message>
        <source>unmetered</source>
        <translation>sin medidor</translation>
    </message>
    <message>
        <source>Wi-Fi Network Metered</source>
        <translation>Red Wi-Fi medida</translation>
    </message>
    <message>
        <source>Prevent large data uploads when on a metered Wi-Fi connection</source>
        <translation>Evite cargas de grandes cantidades de datos cuando esté en una conexión Wi-Fi medida</translation>
    </message>
</context>
<context>
    <name>AutoLaneChangeTimer</name>
    <message>
        <source>Auto Lane Change by Blinker</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Set a timer to delay the auto lane change operation when the blinker is used. No nudge on the steering wheel is required to auto lane change if a timer is set. Default is Nudge.
Please use caution when using this feature. Only use the blinker when traffic and road conditions permit.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>s</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Off</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Nudge</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Nudgeless</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>Brightness</name>
    <message>
        <source>Brightness</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Overrides the brightness of the device.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Auto (Dark)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Auto</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>ConfirmationDialog</name>
    <message>
        <source>Ok</source>
        <translation>OK</translation>
    </message>
    <message>
        <source>Cancel</source>
        <translation>Cancelar</translation>
    </message>
</context>
<context>
    <name>DeclinePage</name>
    <message>
        <source>Back</source>
        <translation>Atrás</translation>
    </message>
    <message>
        <source>Decline, uninstall %1</source>
        <translation>Rechazar, desinstalar %1</translation>
    </message>
    <message>
        <source>You must accept the Terms and Conditions in order to use sunnypilot.</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>DeveloperPanel</name>
    <message>
        <source>Joystick Debug Mode</source>
        <translation>Modo de depuración de joystick</translation>
    </message>
    <message>
        <source>Longitudinal Maneuver Mode</source>
        <translation>Modo de maniobra longitudinal</translation>
    </message>
    <message>
        <source>openpilot Longitudinal Control (Alpha)</source>
        <translation>Control longitudinal de openpilot (fase experimental)</translation>
    </message>
    <message>
        <source>WARNING: openpilot longitudinal control is in alpha for this car and will disable Automatic Emergency Braking (AEB).</source>
        <translation>AVISO: el control longitudinal de openpilot está en fase experimental para este automóvil y desactivará el Frenado Automático de Emergencia (AEB).</translation>
    </message>
    <message>
        <source>Enable ADB</source>
        <translation>Activar ADB</translation>
    </message>
    <message>
        <source>ADB (Android Debug Bridge) allows connecting to your device over USB or over the network. See https://docs.comma.ai/how-to/connect-to-comma for more info.</source>
        <translation>ADB (Android Debug Bridge) permite conectar a su dispositivo por USB o por red. Visite https://docs.comma.ai/how-to/connect-to-comma para más información.</translation>
    </message>
    <message>
        <source>On this car, sunnypilot defaults to the car&apos;s built-in ACC instead of openpilot&apos;s longitudinal control. Enable this to switch to openpilot longitudinal control. Enabling Experimental mode is recommended when enabling openpilot longitudinal control alpha.</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>DeveloperPanelSP</name>
    <message>
        <source>Show Advanced Controls</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Toggle visibility of advanced sunnypilot controls.
This only toggles the visibility of the controls; it does not toggle the actual control enabled/disabled state.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Enable GitHub runner service</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Enables or disables the github runner service.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Enable Quickboot Mode</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Error Log</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>VIEW</source>
        <translation type="unfinished">VER</translation>
    </message>
    <message>
        <source>View the error log for sunnypilot crashes.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>When toggled on, this creates a prebuilt file to allow accelerated boot times. When toggled off, it immediately removes the prebuilt file so compilation of locally edited cpp files can be made. &lt;br&gt;&lt;br&gt;&lt;b&gt;To edit C++ files locally on device, you MUST first turn off this toggle so the changes can recompile.&lt;/b&gt;</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Quickboot mode requires updates to be disabled.&lt;br&gt;Enable &apos;Disable Updates&apos; in the Software panel first.</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>DevicePanel</name>
    <message>
        <source>Dongle ID</source>
        <translation>Dongle ID</translation>
    </message>
    <message>
        <source>N/A</source>
        <translation>N/A</translation>
    </message>
    <message>
        <source>Serial</source>
        <translation>Serial</translation>
    </message>
    <message>
        <source>Pair Device</source>
        <translation>Emparejar Dispositivo</translation>
    </message>
    <message>
        <source>PAIR</source>
        <translation>EMPAREJAR</translation>
    </message>
    <message>
        <source>Pair your device with comma connect (connect.comma.ai) and claim your comma prime offer.</source>
        <translation>Empareja tu dispositivo con comma connect (connect.comma.ai) y reclama tu oferta de comma prime.</translation>
    </message>
    <message>
        <source>Driver Camera</source>
        <translation>Cámara del conductor</translation>
    </message>
    <message>
        <source>PREVIEW</source>
        <translation>VISUALIZAR</translation>
    </message>
    <message>
        <source>Preview the driver facing camera to ensure that driver monitoring has good visibility. (vehicle must be off)</source>
        <translation>Previsualizar la cámara del conductor para garantizar que la monitorización del sistema tenga buena visibilidad (el vehículo tiene que estar apagado)</translation>
    </message>
    <message>
        <source>Reset Calibration</source>
        <translation>Formatear Calibración</translation>
    </message>
    <message>
        <source>RESET</source>
        <translation>REINICIAR</translation>
    </message>
    <message>
        <source>Are you sure you want to reset calibration?</source>
        <translation>¿Seguro que quiere formatear la calibración?</translation>
    </message>
    <message>
        <source>Reset</source>
        <translation>Formatear</translation>
    </message>
    <message>
        <source>Review Training Guide</source>
        <translation>Revisar la Guía de Entrenamiento</translation>
    </message>
    <message>
        <source>REVIEW</source>
        <translation>REVISAR</translation>
    </message>
    <message>
        <source>Are you sure you want to review the training guide?</source>
        <translation>¿Seguro que quiere revisar la guía de entrenamiento?</translation>
    </message>
    <message>
        <source>Review</source>
        <translation>Revisar</translation>
    </message>
    <message>
        <source>Regulatory</source>
        <translation>Regulador</translation>
    </message>
    <message>
        <source>VIEW</source>
        <translation>VER</translation>
    </message>
    <message>
        <source>Change Language</source>
        <translation>Cambiar Idioma</translation>
    </message>
    <message>
        <source>CHANGE</source>
        <translation>CAMBIAR</translation>
    </message>
    <message>
        <source>Select a language</source>
        <translation>Seleccione el idioma</translation>
    </message>
    <message>
        <source>Reboot</source>
        <translation>Reiniciar</translation>
    </message>
    <message>
        <source>Power Off</source>
        <translation>Apagar</translation>
    </message>
    <message>
        <source> Your device is pointed %1° %2 and %3° %4.</source>
        <translation> Su dispositivo está apuntando %1° %2 y %3° %4.</translation>
    </message>
    <message>
        <source>down</source>
        <translation>abajo</translation>
    </message>
    <message>
        <source>up</source>
        <translation>arriba</translation>
    </message>
    <message>
        <source>left</source>
        <translation>izquierda</translation>
    </message>
    <message>
        <source>right</source>
        <translation>derecha</translation>
    </message>
    <message>
        <source>Are you sure you want to reboot?</source>
        <translation>¿Seguro qué quiere reiniciar?</translation>
    </message>
    <message>
        <source>Disengage to Reboot</source>
        <translation>Desactivar para Reiniciar</translation>
    </message>
    <message>
        <source>Are you sure you want to power off?</source>
        <translation>¿Seguro qué quiere apagar?</translation>
    </message>
    <message>
        <source>Disengage to Power Off</source>
        <translation>Desactivar para apagar</translation>
    </message>
    <message>
        <source>Disengage to Reset Calibration</source>
        <translation>Desactivar para restablecer la calibración</translation>
    </message>
    <message>
        <source>openpilot is continuously calibrating, resetting is rarely required. Resetting calibration will restart openpilot if the car is powered on.</source>
        <translation>Openpilot se calibra continuamente, por lo que rara vez es necesario reiniciarlo. Restablecer la calibración reiniciará Openpilot si el automóvil está encendido.</translation>
    </message>
    <message>
        <source>

Steering lag calibration is %1% complete.</source>
        <translation>

La calibración del retraso de dirección está %1% completada.</translation>
    </message>
    <message>
        <source>

Steering lag calibration is complete.</source>
        <translation>

La calibración del retraso de la dirección está completa.</translation>
    </message>
    <message>
        <source> Steering torque response calibration is %1% complete.</source>
        <translation> La calibración de la respuesta del par de dirección está %1% completada.</translation>
    </message>
    <message>
        <source> Steering torque response calibration is complete.</source>
        <translation> La calibración de la respuesta del par de dirección está completa.</translation>
    </message>
    <message>
        <source>Review the rules, features, and limitations of sunnypilot</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>sunnypilot requires the device to be mounted within 4° left or right and within 5° up or 9° down.</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>DevicePanelSP</name>
    <message>
        <source>Quiet Mode</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Driver Camera Preview</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Training Guide</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Regulatory</source>
        <translation type="unfinished">Regulador</translation>
    </message>
    <message>
        <source>Language</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Reset Settings</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Are you sure you want to review the training guide?</source>
        <translation type="unfinished">¿Seguro que quiere revisar la guía de entrenamiento?</translation>
    </message>
    <message>
        <source>Review</source>
        <translation type="unfinished">Revisar</translation>
    </message>
    <message>
        <source>Select a language</source>
        <translation type="unfinished">Seleccione el idioma</translation>
    </message>
    <message>
        <source>Wake-Up Behavior</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Interactivity Timeout</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Apply a custom timeout for settings UI.
This is the time after which settings UI closes automatically if user is not interacting with the screen.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Reboot</source>
        <translation type="unfinished">Reiniciar</translation>
    </message>
    <message>
        <source>Power Off</source>
        <translation type="unfinished">Apagar</translation>
    </message>
    <message>
        <source>Offroad Mode</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Are you sure you want to exit Always Offroad mode?</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Confirm</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Are you sure you want to enter Always Offroad mode?</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Disengage to Enter Always Offroad Mode</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Are you sure you want to reset all sunnypilot settings to default? Once the settings are reset, there is no going back.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Reset</source>
        <translation type="unfinished">Formatear</translation>
    </message>
    <message>
        <source>The reset cannot be undone. You have been warned.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Exit Always Offroad</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Always Offroad</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>⁍ Default: Device will boot/wake-up normally &amp; will be ready to engage.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>⁍ Offroad: Device will be in Always Offroad mode after boot/wake-up.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Controls state of the device after boot/sleep.</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>DriveStats</name>
    <message>
        <source>Drives</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Hours</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>ALL TIME</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>PAST WEEK</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>KM</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Miles</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>DriverViewWindow</name>
    <message>
        <source>camera starting</source>
        <translation>iniciando cámara</translation>
    </message>
</context>
<context>
    <name>ExitOffroadButton</name>
    <message>
        <source>Are you sure you want to exit Always Offroad mode?</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Confirm</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>EXIT ALWAYS OFFROAD MODE</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>ExperimentalModeButton</name>
    <message>
        <source>EXPERIMENTAL MODE ON</source>
        <translation>MODO EXPERIMENTAL</translation>
    </message>
    <message>
        <source>CHILL MODE ON</source>
        <translation>MODO CHILL</translation>
    </message>
</context>
<context>
    <name>FirehosePanel</name>
    <message>
        <source>Firehose Mode: ACTIVE</source>
        <translation>Modo Firehose: ACTIVO</translation>
    </message>
    <message>
        <source>ACTIVE</source>
        <translation>ACTIVO</translation>
    </message>
    <message numerus="yes">
        <source>&lt;b&gt;%n segment(s)&lt;/b&gt; of your driving is in the training dataset so far.</source>
        <translation>
            <numerusform>&lt;b&gt;%n segmento&lt;/b&gt; de tu conducción está en el conjunto de datos de entrenamiento hasta ahora.</numerusform>
            <numerusform>&lt;b&gt;%n segmentos&lt;/b&gt; de tu conducción están en el conjunto de datos de entrenamiento hasta ahora.</numerusform>
        </translation>
    </message>
    <message>
        <source>&lt;span stylesheet=&apos;font-size: 60px; font-weight: bold; color: #e74c3c;&apos;&gt;INACTIVE&lt;/span&gt;: connect to an unmetered network</source>
        <translation>&lt;span stylesheet=&apos;font-size: 60px; font-weight: bold; color: #e74c3c;&apos;&gt;INACTIVO&lt;/span&gt;: conéctate a una red sin límite de datos</translation>
    </message>
    <message>
        <source>Firehose Mode</source>
        <translation>Modo manguera contra incendios</translation>
    </message>
    <message>
        <source>sunnypilot learns to drive by watching humans, like you, drive.

Firehose Mode allows you to maximize your training data uploads to improve openpilot&apos;s driving models. More data means bigger models, which means better Experimental Mode.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>For maximum effectiveness, bring your device inside and connect to a good USB-C adapter and Wi-Fi weekly.&lt;br&gt;&lt;br&gt;Firehose Mode can also work while you&apos;re driving if connected to a hotspot or unlimited SIM card.&lt;br&gt;&lt;br&gt;&lt;br&gt;&lt;b&gt;Frequently Asked Questions&lt;/b&gt;&lt;br&gt;&lt;br&gt;&lt;i&gt;Does it matter how or where I drive?&lt;/i&gt; Nope, just drive as you normally would.&lt;br&gt;&lt;br&gt;&lt;i&gt;Do all of my segments get pulled in Firehose Mode?&lt;/i&gt; No, we selectively pull a subset of your segments.&lt;br&gt;&lt;br&gt;&lt;i&gt;What&apos;s a good USB-C adapter?&lt;/i&gt; Any fast phone or laptop charger should be fine.&lt;br&gt;&lt;br&gt;&lt;i&gt;Does it matter which software I run?&lt;/i&gt; Yes, only upstream sunnypilot (and particular forks) are able to be used for training.</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>HudRenderer</name>
    <message>
        <source>km/h</source>
        <translation>km/h</translation>
    </message>
    <message>
        <source>mph</source>
        <translation>mph</translation>
    </message>
    <message>
        <source>MAX</source>
        <translation>MAX</translation>
    </message>
</context>
<context>
    <name>HyundaiSettings</name>
    <message>
        <source>Off</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Dynamic</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Predictive</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Custom Longitudinal Tuning</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>This feature can only be used with openpilot longitudinal control enabled.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Enable &quot;Always Offroad&quot; in Device panel, or turn vehicle off to select an option.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Off: Uses default tuning</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Dynamic: Adjusts acceleration limits based on current speed</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Predictive: Uses future trajectory data to anticipate needed adjustments</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Fine-tune your driving experience by adjusting acceleration smoothness with openpilot longitudinal control.</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>InputDialog</name>
    <message>
        <source>Cancel</source>
        <translation>Cancelar</translation>
    </message>
    <message numerus="yes">
        <source>Need at least %n character(s)!</source>
        <translation>
            <numerusform>¡Necesita mínimo %n caracter!</numerusform>
            <numerusform>¡Necesita mínimo %n caracteres!</numerusform>
        </translation>
    </message>
</context>
<context>
    <name>LaneChangeSettings</name>
    <message>
        <source>Back</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Auto Lane Change: Delay with Blind Spot</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Toggle to enable a delay timer for seamless lane changes when blind spot monitoring (BSM) detects a obstructing vehicle, ensuring safe maneuvering.</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>LateralPanel</name>
    <message>
        <source>Modular Assistive Driving System (MADS)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Enable the beloved MADS feature. Disable toggle to revert back to stock sunnypilot engagement/disengagement.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Customize MADS</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Customize Lane Change</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Pause Lateral Control with Blinker</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Pause lateral control with blinker when traveling below the desired speed selected.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Enables independent engagements of Automatic Lane Centering (ALC) and Adaptive Cruise Control (ACC).</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Start the vehicle to check vehicle compatibility.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>This platform supports all MADS settings.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>This platform supports limited MADS settings.</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>LongitudinalPanel</name>
    <message>
        <source>Custom ACC Speed Increments</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Enable custom Short &amp; Long press increments for cruise speed increase/decrease.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>This feature can only be used with openpilot longitudinal control enabled.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>This feature is not supported on this platform due to vehicle limitations.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Start the vehicle to check vehicle compatibility.</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>MadsSettings</name>
    <message>
        <source>Toggle with Main Cruise</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Unified Engagement Mode (UEM)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Steering Mode on Brake Pedal</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Note: For vehicles without LFA/LKAS button, disabling this will prevent lateral control engagement.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Engage lateral and longitudinal control with cruise control engagement.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Note: Once lateral control is engaged via UEM, it will remain engaged until it is manually disabled via the MADS button or car shut off.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Start the vehicle to check vehicle compatibility.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>This feature defaults to OFF, and does not allow selection due to vehicle limitations.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>This feature defaults to ON, and does not allow selection due to vehicle limitations.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>This platform only supports Disengage mode due to vehicle limitations.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Remain Active</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Remain Active: ALC will remain active when the brake pedal is pressed.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Pause</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Pause: ALC will pause when the brake pedal is pressed.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Disengage</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Disengage: ALC will disengage when the brake pedal is pressed.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Choose how Automatic Lane Centering (ALC) behaves after the brake pedal is manually pressed in sunnypilot.</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>MaxTimeOffroad</name>
    <message>
        <source>Max Time Offroad</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Device will automatically shutdown after set time once the engine is turned off.&lt;br/&gt;(30h is the default)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Always On</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>h</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>m</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source> (default)</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>ModelsPanel</name>
    <message>
        <source>Current Model</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>SELECT</source>
        <translation type="unfinished">SELECCIONAR</translation>
    </message>
    <message>
        <source>Clear Model Cache</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>CLEAR</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Driving Model</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Navigation Model</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Vision Model</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Policy Model</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Live Learning Steer Delay</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Adjust Software Delay</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Adjust the software delay when Live Learning Steer Delay is toggled off.
The default software delay value is 0.2</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>  %1 - %2</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>downloaded</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>ready</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>from cache</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>  download failed - %1</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>  pending - %1</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Fetching models...</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Select a Model</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Default</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Model download has started in the background.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>We STRONGLY suggest you to reset calibration.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Would you like to do that now?</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Reset Calibration</source>
        <translation type="unfinished">Formatear Calibración</translation>
    </message>
    <message>
        <source>Driving Model Selector</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>This will delete ALL downloaded models from the cache&lt;br/&gt;&lt;u&gt;except the currently active model&lt;/u&gt;.&lt;br/&gt;&lt;br/&gt;Are you sure you want to continue?</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Clear Cache</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Warning: You are on a metered connection!</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Continue</source>
        <translation type="unfinished">Continuar</translation>
    </message>
    <message>
        <source>on Metered</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Cancel</source>
        <translation type="unfinished">Cancelar</translation>
    </message>
    <message>
        <source>Refresh Model List</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>REFRESH</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Fetching Latest Models</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Enable this for the car to learn and adapt its steering response time. Disable to use a fixed steering response time. Keeping this on provides the stock openpilot experience.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Live Steer Delay:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Actuator Delay:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Software Delay:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Total Delay:</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>MultiOptionDialog</name>
    <message>
        <source>Select</source>
        <translation>Seleccionar</translation>
    </message>
    <message>
        <source>Cancel</source>
        <translation>Cancelar</translation>
    </message>
</context>
<context>
    <name>Networking</name>
    <message>
        <source>Advanced</source>
        <translation>Avanzado</translation>
    </message>
    <message>
        <source>Enter password</source>
        <translation>Ingresar contraseña</translation>
    </message>
    <message>
        <source>for &quot;%1&quot;</source>
        <translation>para &quot;%1&quot;</translation>
    </message>
    <message>
        <source>Wrong password</source>
        <translation>Contraseña incorrecta</translation>
    </message>
</context>
<context>
    <name>NetworkingSP</name>
    <message>
        <source>Scan</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Scanning...</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>NeuralNetworkLateralControl</name>
    <message>
        <source>Neural Network Lateral Control (NNLC)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>NNLC is currently not available on this platform.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Start the car to check car compatibility</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>NNLC Not Loaded</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>NNLC Loaded</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Match</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Exact</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Fuzzy</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Match: &quot;Exact&quot; is ideal, but &quot;Fuzzy&quot; is fine too.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Formerly known as &lt;b&gt;&quot;NNFF&quot;&lt;/b&gt;, this replaces the lateral &lt;b&gt;&quot;torque&quot;&lt;/b&gt; controller, with one using a neural network trained on each car&apos;s (actually, each separate EPS firmware) driving data for increased controls accuracy.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Reach out to the sunnypilot team in the following channel at the sunnypilot Discord server</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>with feedback, or to provide log data for your car if your car is currently unsupported:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>if there are any issues:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>and donate logs to get NNLC loaded for your car:</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>OffroadAlert</name>
    <message>
        <source>Device temperature too high. System cooling down before starting. Current internal component temperature: %1</source>
        <translation>La temperatura del dispositivo es muy alta. El sistema se está enfriando antes de iniciar. Temperatura actual del componente interno: %1</translation>
    </message>
    <message>
        <source>Unable to download updates
%1</source>
        <translation>Incapaz de descargar actualizaciones.
%1</translation>
    </message>
    <message>
        <source>Taking camera snapshots. System won&apos;t start until finished.</source>
        <translation>Tomando capturas de las cámaras. El sistema no se iniciará hasta que finalice.</translation>
    </message>
    <message>
        <source>An update to your device&apos;s operating system is downloading in the background. You will be prompted to update when it&apos;s ready to install.</source>
        <translation>Se está descargando una actualización del sistema operativo de su dispositivo en segundo plano. Se le pedirá que actualice cuando esté listo para instalarse.</translation>
    </message>
    <message>
        <source>NVMe drive not mounted.</source>
        <translation>Unidad NVMe no montada.</translation>
    </message>
    <message>
        <source>Device failed to register with the comma.ai backend. It will not connect or upload to comma.ai servers, and receives no support from comma.ai. If this is a device purchased at comma.ai/shop, open a ticket at https://comma.ai/support.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Acknowledge Excessive Actuation</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Snooze Update</source>
        <translation type="unfinished">Posponer Actualización</translation>
    </message>
    <message>
        <source>openpilot detected excessive %1 actuation on your last drive. Please contact support at https://comma.ai/support and share your device&apos;s Dongle ID for troubleshooting.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Immediately connect to the internet to check for updates. If you do not connect to the internet, sunnypilot won&apos;t engage in %1</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Connect to internet to check for updates. sunnypilot won&apos;t automatically start until it connects to internet to check for updates.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>sunnypilot was unable to identify your car. Your car is either unsupported or its ECUs are not recognized. Please submit a pull request to add the firmware versions to the proper vehicle. Need help? Join discord.comma.ai.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>sunnypilot detected a change in the device&apos;s mounting position. Ensure the device is fully seated in the mount and the mount is firmly secured to the windshield.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>OpenStreetMap database is out of date. New maps must be downloaded if you wish to continue using OpenStreetMap data for Enhanced Speed Control and road name display.

%1</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>OffroadHome</name>
    <message>
        <source>UPDATE</source>
        <translation>ACTUALIZAR</translation>
    </message>
    <message>
        <source> ALERTS</source>
        <translation> ALERTAS</translation>
    </message>
    <message>
        <source> ALERT</source>
        <translation> ALERTA</translation>
    </message>
</context>
<context>
    <name>OffroadHomeSP</name>
    <message>
        <source>ALWAYS OFFROAD ACTIVE</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>OnroadAlerts</name>
    <message>
        <source>TAKE CONTROL IMMEDIATELY</source>
        <translation>TOME CONTROL INMEDIATAMENTE</translation>
    </message>
    <message>
        <source>Reboot Device</source>
        <translation>Reiniciar Dispositivo</translation>
    </message>
    <message>
        <source>Waiting to start</source>
        <translation>Esperando para iniciar</translation>
    </message>
    <message>
        <source>System Unresponsive</source>
        <translation>Systema no responde</translation>
    </message>
    <message>
        <source>sunnypilot Unavailable</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>OsmPanel</name>
    <message>
        <source>Mapd Version</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Offline Maps ETA</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Time Elapsed</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Downloaded Maps</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>DELETE</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>This will delete ALL downloaded maps

Are you sure you want to delete all the maps?</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Yes, delete all the maps.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Database Update</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>CHECK</source>
        <translation type="unfinished">VERIFICAR</translation>
    </message>
    <message>
        <source>Country</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>SELECT</source>
        <translation type="unfinished">SELECCIONAR</translation>
    </message>
    <message>
        <source>Fetching Country list...</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>State</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Fetching State list...</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>All</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>REFRESH</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>UPDATE</source>
        <translation type="unfinished">ACTUALIZAR</translation>
    </message>
    <message>
        <source>Download starting...</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Error: Invalid download. Retry.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Download complete!</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>

Warning: You are on a metered connection!</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>This will start the download process and it might take a while to complete.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Continue on Metered</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Start Download</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>m </source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>s</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Calculating...</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Downloaded</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Calculating ETA...</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Ready</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Time remaining: </source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>PairingPopup</name>
    <message>
        <source>Pair your device to your comma account</source>
        <translation>Empareje su dispositivo con su cuenta de comma</translation>
    </message>
    <message>
        <source>Go to https://connect.comma.ai on your phone</source>
        <translation>Vaya a https://connect.comma.ai en su teléfono</translation>
    </message>
    <message>
        <source>Click &quot;add new device&quot; and scan the QR code on the right</source>
        <translation>Seleccione &quot;agregar nuevo dispositivo&quot; y escanee el código QR a la derecha</translation>
    </message>
    <message>
        <source>Bookmark connect.comma.ai to your home screen to use it like an app</source>
        <translation>Añada connect.comma.ai a su pantalla de inicio para usarlo como una aplicación</translation>
    </message>
    <message>
        <source>Please connect to Wi-Fi to complete initial pairing</source>
        <translation>Conéctese a Wi-Fi para completar el emparejamiento inicial</translation>
    </message>
</context>
<context>
    <name>ParamControl</name>
    <message>
        <source>Enable</source>
        <translation>Activar</translation>
    </message>
    <message>
        <source>Cancel</source>
        <translation>Cancelar</translation>
    </message>
</context>
<context>
    <name>ParamControlSP</name>
    <message>
        <source>Enable</source>
        <translation type="unfinished">Activar</translation>
    </message>
    <message>
        <source>Cancel</source>
        <translation type="unfinished">Cancelar</translation>
    </message>
</context>
<context>
    <name>PlatformSelector</name>
    <message>
        <source>Vehicle</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>SEARCH</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Search your vehicle</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Enter model year (e.g., 2021) and model name (Toyota Corolla):</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>SEARCHING</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>REMOVE</source>
        <translation type="unfinished">ELIMINAR</translation>
    </message>
    <message>
        <source>This setting will take effect immediately.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>This setting will take effect once the device enters offroad state.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Vehicle Selector</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Confirm</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Cancel</source>
        <translation type="unfinished">Cancelar</translation>
    </message>
    <message>
        <source>No vehicles found for query: %1</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Select a vehicle</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Unrecognized Vehicle</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Fingerprinted automatically</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Manually selected</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Not fingerprinted or manually selected</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Select vehicle to force fingerprint manually.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Colors represent fingerprint status:</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>PrimeAdWidget</name>
    <message>
        <source>Upgrade Now</source>
        <translation>Actualizar Ahora</translation>
    </message>
    <message>
        <source>Become a comma prime member at connect.comma.ai</source>
        <translation>Hazte miembro de comma prime en connect.comma.ai</translation>
    </message>
    <message>
        <source>PRIME FEATURES:</source>
        <translation>BENEFICIOS PRIME:</translation>
    </message>
    <message>
        <source>Remote access</source>
        <translation>Acceso remoto</translation>
    </message>
    <message>
        <source>24/7 LTE connectivity</source>
        <translation>Conectividad LTE 24/7</translation>
    </message>
    <message>
        <source>1 year of drive storage</source>
        <translation>1 año de almacenamiento</translation>
    </message>
    <message>
        <source>Remote snapshots</source>
        <translation>Capturas remotas</translation>
    </message>
</context>
<context>
    <name>PrimeUserWidget</name>
    <message>
        <source>✓ SUBSCRIBED</source>
        <translation>✓ SUSCRITO</translation>
    </message>
    <message>
        <source>comma prime</source>
        <translation>comma prime</translation>
    </message>
</context>
<context>
    <name>QObject</name>
    <message>
        <source>now</source>
        <translation>ahora</translation>
    </message>
    <message numerus="yes">
        <source>%n minute(s) ago</source>
        <translation>
            <numerusform>hace %n min</numerusform>
            <numerusform>hace %n mins</numerusform>
        </translation>
    </message>
    <message numerus="yes">
        <source>%n hour(s) ago</source>
        <translation>
            <numerusform>hace %n hora</numerusform>
            <numerusform>hace %n horas</numerusform>
        </translation>
    </message>
    <message numerus="yes">
        <source>%n day(s) ago</source>
        <translation>
            <numerusform>hace %n día</numerusform>
            <numerusform>hace %n días</numerusform>
        </translation>
    </message>
    <message>
        <source>sunnypilot</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>SettingsWindow</name>
    <message>
        <source>×</source>
        <translation>×</translation>
    </message>
    <message>
        <source>Device</source>
        <translation>Dispositivo</translation>
    </message>
    <message>
        <source>Network</source>
        <translation>Red</translation>
    </message>
    <message>
        <source>Toggles</source>
        <translation>Ajustes</translation>
    </message>
    <message>
        <source>Software</source>
        <translation>Software</translation>
    </message>
    <message>
        <source>Developer</source>
        <translation>Desarrollador</translation>
    </message>
    <message>
        <source>Firehose</source>
        <translation>Firehose</translation>
    </message>
</context>
<context>
    <name>SettingsWindowSP</name>
    <message>
        <source>×</source>
        <translation type="unfinished">×</translation>
    </message>
    <message>
        <source>Device</source>
        <translation type="unfinished">Dispositivo</translation>
    </message>
    <message>
        <source>Network</source>
        <translation type="unfinished">Red</translation>
    </message>
    <message>
        <source>sunnylink</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Toggles</source>
        <translation type="unfinished">Ajustes</translation>
    </message>
    <message>
        <source>Software</source>
        <translation type="unfinished">Software</translation>
    </message>
    <message>
        <source>Models</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Steering</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Cruise</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Visuals</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>OSM</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Trips</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Vehicle</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Firehose</source>
        <translation type="unfinished">Firehose</translation>
    </message>
    <message>
        <source>Developer</source>
        <translation type="unfinished">Desarrollador</translation>
    </message>
</context>
<context>
    <name>SetupWidget</name>
    <message>
        <source>Finish Setup</source>
        <translation>Terminar configuración</translation>
    </message>
    <message>
        <source>Pair your device with comma connect (connect.comma.ai) and claim your comma prime offer.</source>
        <translation>Empareje su dispositivo con comma connect (connect.comma.ai) y reclame su oferta de comma prime.</translation>
    </message>
    <message>
        <source>Pair device</source>
        <translation>Emparejar dispositivo</translation>
    </message>
</context>
<context>
    <name>Sidebar</name>
    <message>
        <source>CONNECT</source>
        <translation>CONNECT</translation>
    </message>
    <message>
        <source>OFFLINE</source>
        <translation>OFFLINE</translation>
    </message>
    <message>
        <source>ONLINE</source>
        <translation>EN LÍNEA</translation>
    </message>
    <message>
        <source>ERROR</source>
        <translation>ERROR</translation>
    </message>
    <message>
        <source>TEMP</source>
        <translation>TEMP</translation>
    </message>
    <message>
        <source>HIGH</source>
        <translation>ALTA</translation>
    </message>
    <message>
        <source>GOOD</source>
        <translation>BUENA</translation>
    </message>
    <message>
        <source>OK</source>
        <translation>OK</translation>
    </message>
    <message>
        <source>VEHICLE</source>
        <translation>VEHÍCULO</translation>
    </message>
    <message>
        <source>NO</source>
        <translation>SIN</translation>
    </message>
    <message>
        <source>PANDA</source>
        <translation>PANDA</translation>
    </message>
    <message>
        <source>--</source>
        <translation>--</translation>
    </message>
    <message>
        <source>Wi-Fi</source>
        <translation>Wi-Fi</translation>
    </message>
    <message>
        <source>ETH</source>
        <translation>ETH</translation>
    </message>
    <message>
        <source>2G</source>
        <translation>2G</translation>
    </message>
    <message>
        <source>3G</source>
        <translation>3G</translation>
    </message>
    <message>
        <source>LTE</source>
        <translation>LTE</translation>
    </message>
    <message>
        <source>5G</source>
        <translation>5G</translation>
    </message>
</context>
<context>
    <name>SidebarSP</name>
    <message>
        <source>DISABLED</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>OFFLINE</source>
        <translation type="unfinished">OFFLINE</translation>
    </message>
    <message>
        <source>REGIST...</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>ONLINE</source>
        <translation type="unfinished">EN LÍNEA</translation>
    </message>
    <message>
        <source>ERROR</source>
        <translation type="unfinished">ERROR</translation>
    </message>
    <message>
        <source>SUNNYLINK</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>SoftwarePanel</name>
    <message>
        <source>Updates are only downloaded while the car is off.</source>
        <translation>Actualizaciones solo se descargan con el auto apagado.</translation>
    </message>
    <message>
        <source>Current Version</source>
        <translation>Versión Actual</translation>
    </message>
    <message>
        <source>Download</source>
        <translation>Descargar</translation>
    </message>
    <message>
        <source>CHECK</source>
        <translation>VERIFICAR</translation>
    </message>
    <message>
        <source>Install Update</source>
        <translation>Actualizar</translation>
    </message>
    <message>
        <source>INSTALL</source>
        <translation>INSTALAR</translation>
    </message>
    <message>
        <source>Target Branch</source>
        <translation>Rama objetivo</translation>
    </message>
    <message>
        <source>SELECT</source>
        <translation>SELECCIONAR</translation>
    </message>
    <message>
        <source>Select a branch</source>
        <translation>Selecione una rama</translation>
    </message>
    <message>
        <source>Uninstall %1</source>
        <translation>Desinstalar %1</translation>
    </message>
    <message>
        <source>UNINSTALL</source>
        <translation>DESINSTALAR</translation>
    </message>
    <message>
        <source>Are you sure you want to uninstall?</source>
        <translation>¿Seguro qué desea desinstalar?</translation>
    </message>
    <message>
        <source>Uninstall</source>
        <translation>Desinstalar</translation>
    </message>
    <message>
        <source>failed to check for update</source>
        <translation>no se pudo buscar actualizaciones</translation>
    </message>
    <message>
        <source>DOWNLOAD</source>
        <translation>DESCARGAR</translation>
    </message>
    <message>
        <source>update available</source>
        <translation>actualización disponible</translation>
    </message>
    <message>
        <source>never</source>
        <translation>nunca</translation>
    </message>
    <message>
        <source>up to date, last checked %1</source>
        <translation>actualizado, último chequeo %1</translation>
    </message>
</context>
<context>
    <name>SoftwarePanelSP</name>
    <message>
        <source>Search Branch</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Enter search keywords, or leave blank to list all branches.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Disable Updates</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>When enabled, software updates will be disabled. &lt;b&gt;This requires a reboot to take effect.&lt;/b&gt;</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>No branches found for keywords: %1</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Select a branch</source>
        <translation type="unfinished">Selecione una rama</translation>
    </message>
    <message>
        <source>%1 updates requires a reboot.&lt;br&gt;Reboot now?</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Reboot</source>
        <translation type="unfinished">Reiniciar</translation>
    </message>
    <message>
        <source>When enabled, software updates will be disabled.&lt;br&gt;&lt;b&gt;This requires a reboot to take effect.&lt;/b&gt;</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Please enable always offroad mode or turn off vehicle to adjust these toggles</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>SshControl</name>
    <message>
        <source>SSH Keys</source>
        <translation>Clave SSH</translation>
    </message>
    <message>
        <source>Warning: This grants SSH access to all public keys in your GitHub settings. Never enter a GitHub username other than your own. A comma employee will NEVER ask you to add their GitHub username.</source>
        <translation>Aviso: Esto otorga acceso SSH a todas las claves públicas en su Github. Nunca ingrese un nombre de usuario de Github que no sea suyo. Un empleado de comma NUNCA le pedirá que añada un usuario de Github que no sea el suyo.</translation>
    </message>
    <message>
        <source>ADD</source>
        <translation>AÑADIR</translation>
    </message>
    <message>
        <source>Enter your GitHub username</source>
        <translation>Ingrese su usuario de GitHub</translation>
    </message>
    <message>
        <source>LOADING</source>
        <translation>CARGANDO</translation>
    </message>
    <message>
        <source>REMOVE</source>
        <translation>ELIMINAR</translation>
    </message>
    <message>
        <source>Username &apos;%1&apos; has no keys on GitHub</source>
        <translation>El usuario &quot;%1” no tiene claves en GitHub</translation>
    </message>
    <message>
        <source>Request timed out</source>
        <translation>Solicitud expirada</translation>
    </message>
    <message>
        <source>Username &apos;%1&apos; doesn&apos;t exist on GitHub</source>
        <translation>El usuario &apos;%1&apos; no existe en Github</translation>
    </message>
</context>
<context>
    <name>SshToggle</name>
    <message>
        <source>Enable SSH</source>
        <translation>Habilitar SSH</translation>
    </message>
</context>
<context>
    <name>SunnylinkPanel</name>
    <message>
        <source>This is the master switch, it will allow you to cutoff any sunnylink requests should you want to do that.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Enable sunnylink</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Sponsor Status</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>SPONSOR</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Become a sponsor of sunnypilot to get early access to sunnylink features when they become available.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Pair GitHub Account</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>PAIR</source>
        <translation type="unfinished">EMPAREJAR</translation>
    </message>
    <message>
        <source>Pair your GitHub account to grant your device sponsor benefits, including API access on sunnylink.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>N/A</source>
        <translation type="unfinished">N/A</translation>
    </message>
    <message>
        <source>sunnylink Dongle ID not found. This may be due to weak internet connection or sunnylink registration issue. Please reboot and try again.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>🎉Welcome back! We&apos;re excited to see you&apos;ve enabled sunnylink again! 🚀</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>👋Not going to lie, it&apos;s sad to see you disabled sunnylink 😢, but we&apos;ll be here when you&apos;re ready to come back 🎉.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Backup Settings</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Are you sure you want to backup sunnypilot settings?</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Back Up</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Restore Settings</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Are you sure you want to restore the last backed up sunnypilot settings?</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Restore</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Backup in progress %1%</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Backup Failed</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Settings backup completed.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Restore in progress %1%</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Restore Failed</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Unable to restore the settings, try again later.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Settings restored. Confirm to restart the interface.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Device ID</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>THANKS ♥</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Not Sponsor</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Paired</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Not Paired</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Enable sunnylink uploader to allow sunnypilot to upload your driving data to sunnypilot servers. (only for highest tiers, and does NOT bring ANY benefit to you. We are just testing data volume.)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>[Don&apos;t use] Enable sunnylink uploader</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>🚀 sunnylink 🚀</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>For secure backup, restore, and remote configuration</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Sponsorship isn&apos;t required for basic backup/restore</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Click the sponsor button for more details</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>SunnylinkSponsorPopup</name>
    <message>
        <source>Scan the QR code to login to your GitHub account</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Follow the prompts to complete the pairing process</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Re-enter the &quot;sunnylink&quot; panel to verify sponsorship status</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>If sponsorship status was not updated, please contact a moderator on Discord at https://discord.gg/sunnypilot</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Scan the QR code to visit sunnyhaibin&apos;s GitHub Sponsors page</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Choose your sponsorship tier and confirm your support</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Join our community on Discord at https://discord.gg/sunnypilot and reach out to a moderator to confirm your sponsor status</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Pair your GitHub account</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Early Access: Become a sunnypilot Sponsor</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>TermsPage</name>
    <message>
        <source>Decline</source>
        <translation>Rechazar</translation>
    </message>
    <message>
        <source>Agree</source>
        <translation>Aceptar</translation>
    </message>
    <message>
        <source>Welcome to sunnypilot</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>You must accept the Terms and Conditions to use sunnypilot. Read the latest terms at &lt;span style=&apos;color: #465BEA;&apos;&gt;https://comma.ai/terms&lt;/span&gt; before continuing.</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>TogglesPanel</name>
    <message>
        <source>Experimental Mode</source>
        <translation>Modo Experimental</translation>
    </message>
    <message>
        <source>Disengage on Accelerator Pedal</source>
        <translation>Desactivar con el Acelerador</translation>
    </message>
    <message>
        <source>Enable Lane Departure Warnings</source>
        <translation>Activar Avisos de Salida de Carril</translation>
    </message>
    <message>
        <source>Receive alerts to steer back into the lane when your vehicle drifts over a detected lane line without a turn signal activated while driving over 31 mph (50 km/h).</source>
        <translation>Recibir alertas para volver al carril cuando su vehículo se salga fuera del carril sin que esté activada la señal de giro y esté conduciendo por encima de 50 km/h (31 mph).</translation>
    </message>
    <message>
        <source>Always-On Driver Monitoring</source>
        <translation>Monitoreo Permanente del Conductor</translation>
    </message>
    <message>
        <source>Record and Upload Driver Camera</source>
        <translation>Grabar y Subir Cámara del Conductor</translation>
    </message>
    <message>
        <source>Upload data from the driver facing camera and help improve the driver monitoring algorithm.</source>
        <translation>Subir datos de la cámara del conductor para ayudar a mejorar el algoritmo de monitoreo del conductor.</translation>
    </message>
    <message>
        <source>Use Metric System</source>
        <translation>Usar Sistema Métrico</translation>
    </message>
    <message>
        <source>Display speed in km/h instead of mph.</source>
        <translation>Mostrar velocidad en km/h en vez de mph.</translation>
    </message>
    <message>
        <source>Aggressive</source>
        <translation>Agresivo</translation>
    </message>
    <message>
        <source>Standard</source>
        <translation>Estándar</translation>
    </message>
    <message>
        <source>Relaxed</source>
        <translation>Relajado</translation>
    </message>
    <message>
        <source>Driving Personality</source>
        <translation>Personalidad de conducción</translation>
    </message>
    <message>
        <source>End-to-End Longitudinal Control</source>
        <translation>Control Longitudinal de Punta a Punta</translation>
    </message>
    <message>
        <source>New Driving Visualization</source>
        <translation>Nueva Visualización de la conducción</translation>
    </message>
    <message>
        <source>The driving visualization will transition to the road-facing wide-angle camera at low speeds to better show some turns. The Experimental mode logo will also be shown in the top right corner.</source>
        <translation>La visualización de la conducción cambiará a la cámara que enfoca la carretera a velocidades bajas para mostrar mejor los giros. El logo del modo experimental también se mostrará en la esquina superior derecha.</translation>
    </message>
    <message>
        <source>Experimental mode is currently unavailable on this car since the car&apos;s stock ACC is used for longitudinal control.</source>
        <translation>El modo Experimental no está disponible actualmente para este auto, ya que el ACC default del auto está siendo usado para el control longitudinal.</translation>
    </message>
    <message>
        <source>openpilot longitudinal control may come in a future update.</source>
        <translation>El control longitudinal de openpilot podrá llegar en futuras actualizaciones.</translation>
    </message>
    <message>
        <source> Changing this setting will restart openpilot if the car is powered on.</source>
        <translation> Cambiar esta configuración reiniciará Openpilot si el automóvil está encendido.</translation>
    </message>
    <message>
        <source>Record and Upload Microphone Audio</source>
        <translation>Grabar y cargar audio de micrófono</translation>
    </message>
    <message>
        <source>Record and store microphone audio while driving. The audio will be included in the dashcam video in comma connect.</source>
        <translation>Graba y almacena el audio del micrófono mientras conduces. El audio se incluirá en el video de la cámara del tablero en comma connect.</translation>
    </message>
    <message>
        <source>Enable sunnypilot</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Use the sunnypilot system for adaptive cruise control and lane keep driver assistance. Your attention is required at all times to use this feature.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Enable Dynamic Experimental Control</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Enable toggle to allow the model to determine when to use sunnypilot ACC or sunnypilot End to End Longitudinal.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>When enabled, pressing the accelerator pedal will disengage sunnypilot.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Enable driver monitoring even when sunnypilot is not engaged.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Standard is recommended. In aggressive mode, sunnypilot will follow lead cars closer and be more aggressive with the gas and brake. In relaxed mode sunnypilot will stay further away from lead cars. On supported cars, you can cycle through these personalities with your steering wheel distance button.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>sunnypilot defaults to driving in &lt;b&gt;chill mode&lt;/b&gt;. Experimental mode enables &lt;b&gt;alpha-level features&lt;/b&gt; that aren&apos;t ready for chill mode. Experimental features are listed below:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Let the driving model control the gas and brakes. sunnypilot will drive as it thinks a human would, including stopping for red lights and stop signs. Since the driving model decides the speed to drive, the set speed will only act as an upper bound. This is an alpha quality feature; mistakes should be expected.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>An alpha version of sunnypilot longitudinal control can be tested, along with Experimental mode, on non-release branches.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Enable the sunnypilot longitudinal control (alpha) toggle to allow Experimental mode.</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>TreeOptionDialog</name>
    <message>
        <source>Select</source>
        <translation type="unfinished">Seleccionar</translation>
    </message>
    <message>
        <source>Cancel</source>
        <translation type="unfinished">Cancelar</translation>
    </message>
</context>
<context>
    <name>VisualsPanel</name>
    <message>
        <source>Show Blind Spot Warnings</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Enabling this will display warnings when a vehicle is detected in your blind spot as long as your car has BSM supported.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source> Changing this setting will restart openpilot if the car is powered on.</source>
        <translation type="unfinished"> Cambiar esta configuración reiniciará Openpilot si el automóvil está encendido.</translation>
    </message>
    <message>
        <source>Off</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Distance</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Speed</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Time</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>All</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Display Metrics Below Chevron</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Display useful metrics below the chevron that tracks the lead car (only applicable to cars with openpilot longitudinal control).</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>WiFiPromptWidget</name>
    <message>
        <source>Open</source>
        <translation>Abrir</translation>
    </message>
    <message>
        <source>Maximize your training data uploads to improve openpilot&apos;s driving models.</source>
        <translation>Maximice sus cargas de datos de entrenamiento para mejorar los modelos de conducción de openpilot.</translation>
    </message>
    <message>
        <source>&lt;span style=&apos;font-family: &quot;Noto Color Emoji&quot;;&apos;&gt;🔥&lt;/span&gt; Firehose Mode &lt;span style=&apos;font-family: Noto Color Emoji;&apos;&gt;🔥&lt;/span&gt;</source>
        <translation>&lt;span style=&apos;font-family: &quot;Noto Color Emoji&quot;;&apos;&gt;🔥&lt;/span&gt; Modo Firehose &lt;span style=&apos;font-family: Noto Color Emoji;&apos;&gt;🔥&lt;/span&gt;</translation>
    </message>
</context>
<context>
    <name>WifiUI</name>
    <message>
        <source>Scanning for networks...</source>
        <translation>Buscando redes...</translation>
    </message>
    <message>
        <source>CONNECTING...</source>
        <translation>CONECTANDO...</translation>
    </message>
    <message>
        <source>FORGET</source>
        <translation>OLVIDAR</translation>
    </message>
    <message>
        <source>Forget Wi-Fi Network &quot;%1&quot;?</source>
        <translation>¿Olvidar la Red de Wi-Fi &quot;%1&quot;?</translation>
    </message>
    <message>
        <source>Forget</source>
        <translation>Olvidar</translation>
    </message>
</context>
</TS>