openpilot/selfdrive/ui/translations/main_zh-CHT.ts

<?xml version="1.0" encoding="utf-8"?>
<!DOCTYPE TS>
<TS version="2.1" language="zh_TW">
<context>
    <name>AbstractAlert</name>
    <message>
        <source>Close</source>
        <translation>關閉</translation>
    </message>
    <message>
        <source>Reboot and Update</source>
        <translation>重啟並更新</translation>
    </message>
</context>
<context>
    <name>AdvancedNetworking</name>
    <message>
        <source>Back</source>
        <translation>回上頁</translation>
    </message>
    <message>
        <source>Enable Tethering</source>
        <translation>啟用網路分享</translation>
    </message>
    <message>
        <source>Tethering Password</source>
        <translation>網路分享密碼</translation>
    </message>
    <message>
        <source>EDIT</source>
        <translation>編輯</translation>
    </message>
    <message>
        <source>Enter new tethering password</source>
        <translation>輸入新的網路分享密碼</translation>
    </message>
    <message>
        <source>IP Address</source>
        <translation>IP 地址</translation>
    </message>
    <message>
        <source>Enable Roaming</source>
        <translation>啟用漫遊</translation>
    </message>
    <message>
        <source>APN Setting</source>
        <translation>APN 設置</translation>
    </message>
    <message>
        <source>Enter APN</source>
        <translation>輸入 APN</translation>
    </message>
    <message>
        <source>leave blank for automatic configuration</source>
        <translation>留空白將自動配置</translation>
    </message>
    <message>
        <source>Cellular Metered</source>
        <translation>計費的行動網路</translation>
    </message>
    <message>
        <source>Hidden Network</source>
        <translation>隱藏的網路</translation>
    </message>
    <message>
        <source>CONNECT</source>
        <translation>連線</translation>
    </message>
    <message>
        <source>Enter SSID</source>
        <translation>輸入 SSID</translation>
    </message>
    <message>
        <source>Enter password</source>
        <translation>輸入密碼</translation>
    </message>
    <message>
        <source>for &quot;%1&quot;</source>
        <translation>給 &quot;%1&quot;</translation>
    </message>
    <message>
        <source>Prevent large data uploads when on a metered cellular connection</source>
        <translation>在使用計費行動網路時，防止上傳大量數據</translation>
    </message>
    <message>
        <source>default</source>
        <translation>預設</translation>
    </message>
    <message>
        <source>metered</source>
        <translation>計費</translation>
    </message>
    <message>
        <source>unmetered</source>
        <translation>非計費</translation>
    </message>
    <message>
        <source>Wi-Fi Network Metered</source>
        <translation>計費 Wi-Fi 網路</translation>
    </message>
    <message>
        <source>Prevent large data uploads when on a metered Wi-Fi connection</source>
        <translation>在使用計費 Wi-Fi 網路時，防止上傳大量數據</translation>
    </message>
</context>
<context>
    <name>AutoLaneChangeTimer</name>
    <message>
        <source>Auto Lane Change by Blinker</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Set a timer to delay the auto lane change operation when the blinker is used. No nudge on the steering wheel is required to auto lane change if a timer is set. Default is Nudge.
Please use caution when using this feature. Only use the blinker when traffic and road conditions permit.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>s</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Off</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Nudge</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Nudgeless</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>Brightness</name>
    <message>
        <source>Brightness</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Overrides the brightness of the device.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Auto (Dark)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Auto</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>ConfirmationDialog</name>
    <message>
        <source>Ok</source>
        <translation>確定</translation>
    </message>
    <message>
        <source>Cancel</source>
        <translation>取消</translation>
    </message>
</context>
<context>
    <name>DeclinePage</name>
    <message>
        <source>Back</source>
        <translation>回上頁</translation>
    </message>
    <message>
        <source>Decline, uninstall %1</source>
        <translation>拒絕並解除安裝 %1</translation>
    </message>
    <message>
        <source>You must accept the Terms and Conditions in order to use sunnypilot.</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>DeveloperPanel</name>
    <message>
        <source>Joystick Debug Mode</source>
        <translation>搖桿調試模式</translation>
    </message>
    <message>
        <source>Longitudinal Maneuver Mode</source>
        <translation>縱向操控測試模式</translation>
    </message>
    <message>
        <source>openpilot Longitudinal Control (Alpha)</source>
        <translation>openpilot 縱向控制 (Alpha 版)</translation>
    </message>
    <message>
        <source>WARNING: openpilot longitudinal control is in alpha for this car and will disable Automatic Emergency Braking (AEB).</source>
        <translation>警告：此車輛的 openpilot 縱向控制功能目前處於 Alpha 版本，使用此功能將會停用自動緊急煞車（AEB）功能。</translation>
    </message>
    <message>
        <source>Enable ADB</source>
        <translation>啟用 ADB</translation>
    </message>
    <message>
        <source>ADB (Android Debug Bridge) allows connecting to your device over USB or over the network. See https://docs.comma.ai/how-to/connect-to-comma for more info.</source>
        <translation>ADB（Android 調試橋接）允許通過 USB 或網絡連接到您的設備。更多信息請參見 [https://docs.comma.ai/how-to/connect-to-comma](https://docs.comma.ai/how-to/connect-to-comma)。</translation>
    </message>
    <message>
        <source>On this car, sunnypilot defaults to the car&apos;s built-in ACC instead of openpilot&apos;s longitudinal control. Enable this to switch to openpilot longitudinal control. Enabling Experimental mode is recommended when enabling openpilot longitudinal control alpha.</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>DeveloperPanelSP</name>
    <message>
        <source>Show Advanced Controls</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Toggle visibility of advanced sunnypilot controls.
This only toggles the visibility of the controls; it does not toggle the actual control enabled/disabled state.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Enable GitHub runner service</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Enables or disables the github runner service.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Enable Quickboot Mode</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Error Log</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>VIEW</source>
        <translation type="unfinished">觀看</translation>
    </message>
    <message>
        <source>View the error log for sunnypilot crashes.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>When toggled on, this creates a prebuilt file to allow accelerated boot times. When toggled off, it immediately removes the prebuilt file so compilation of locally edited cpp files can be made. &lt;br&gt;&lt;br&gt;&lt;b&gt;To edit C++ files locally on device, you MUST first turn off this toggle so the changes can recompile.&lt;/b&gt;</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Quickboot mode requires updates to be disabled.&lt;br&gt;Enable &apos;Disable Updates&apos; in the Software panel first.</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>DevicePanel</name>
    <message>
        <source>Dongle ID</source>
        <translation>Dongle ID</translation>
    </message>
    <message>
        <source>N/A</source>
        <translation>無法使用</translation>
    </message>
    <message>
        <source>Serial</source>
        <translation>序號</translation>
    </message>
    <message>
        <source>Driver Camera</source>
        <translation>駕駛員監控鏡頭</translation>
    </message>
    <message>
        <source>PREVIEW</source>
        <translation>預覽</translation>
    </message>
    <message>
        <source>Preview the driver facing camera to ensure that driver monitoring has good visibility. (vehicle must be off)</source>
        <translation>預覽駕駛員監控鏡頭畫面，以確保其具有良好視野。（僅在熄火時可用）</translation>
    </message>
    <message>
        <source>Reset Calibration</source>
        <translation>重設校準</translation>
    </message>
    <message>
        <source>RESET</source>
        <translation>重設</translation>
    </message>
    <message>
        <source>Are you sure you want to reset calibration?</source>
        <translation>您確定要重設校準嗎？</translation>
    </message>
    <message>
        <source>Review Training Guide</source>
        <translation>觀看使用教學</translation>
    </message>
    <message>
        <source>REVIEW</source>
        <translation>觀看</translation>
    </message>
    <message>
        <source>Are you sure you want to review the training guide?</source>
        <translation>您確定要觀看使用教學嗎？</translation>
    </message>
    <message>
        <source>Regulatory</source>
        <translation>法規/監管</translation>
    </message>
    <message>
        <source>VIEW</source>
        <translation>觀看</translation>
    </message>
    <message>
        <source>Change Language</source>
        <translation>更改語言</translation>
    </message>
    <message>
        <source>CHANGE</source>
        <translation>更改</translation>
    </message>
    <message>
        <source>Select a language</source>
        <translation>選擇語言</translation>
    </message>
    <message>
        <source>Reboot</source>
        <translation>重新啟動</translation>
    </message>
    <message>
        <source>Power Off</source>
        <translation>關機</translation>
    </message>
    <message>
        <source> Your device is pointed %1° %2 and %3° %4.</source>
        <translation> 你的裝置目前朝%2 %1° 以及朝%4 %3° 。</translation>
    </message>
    <message>
        <source>down</source>
        <translation>下</translation>
    </message>
    <message>
        <source>up</source>
        <translation>上</translation>
    </message>
    <message>
        <source>left</source>
        <translation>左</translation>
    </message>
    <message>
        <source>right</source>
        <translation>右</translation>
    </message>
    <message>
        <source>Are you sure you want to reboot?</source>
        <translation>您確定要重新啟動嗎？</translation>
    </message>
    <message>
        <source>Disengage to Reboot</source>
        <translation>請先取消控車才能重新啟動</translation>
    </message>
    <message>
        <source>Are you sure you want to power off?</source>
        <translation>您確定您要關機嗎？</translation>
    </message>
    <message>
        <source>Disengage to Power Off</source>
        <translation>請先取消控車才能關機</translation>
    </message>
    <message>
        <source>Reset</source>
        <translation>重設</translation>
    </message>
    <message>
        <source>Review</source>
        <translation>回顧</translation>
    </message>
    <message>
        <source>Pair your device with comma connect (connect.comma.ai) and claim your comma prime offer.</source>
        <translation>將您的裝置與 comma connect (connect.comma.ai) 配對並領取您的 comma 高級會員優惠。</translation>
    </message>
    <message>
        <source>Pair Device</source>
        <translation>配對裝置</translation>
    </message>
    <message>
        <source>PAIR</source>
        <translation>配對</translation>
    </message>
    <message>
        <source>Disengage to Reset Calibration</source>
        <translation>解除以重設校準</translation>
    </message>
    <message>
        <source>openpilot is continuously calibrating, resetting is rarely required. Resetting calibration will restart openpilot if the car is powered on.</source>
        <translation>openpilot 會持續進行校準，因此很少需要重設。若車輛電源開啟，重設校準將會重新啟動 openpilot。</translation>
    </message>
    <message>
        <source>

Steering lag calibration is %1% complete.</source>
        <translation>

轉向延遲校準已完成 %1%。</translation>
    </message>
    <message>
        <source>

Steering lag calibration is complete.</source>
        <translation>

轉向延遲校準已完成。</translation>
    </message>
    <message>
        <source> Steering torque response calibration is %1% complete.</source>
        <translation> 轉向扭矩反應校準已完成 %1%。</translation>
    </message>
    <message>
        <source> Steering torque response calibration is complete.</source>
        <translation> 轉向扭矩反應校準已完成。</translation>
    </message>
    <message>
        <source>Review the rules, features, and limitations of sunnypilot</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>sunnypilot requires the device to be mounted within 4° left or right and within 5° up or 9° down.</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>DevicePanelSP</name>
    <message>
        <source>Quiet Mode</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Driver Camera Preview</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Training Guide</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Regulatory</source>
        <translation type="unfinished">法規/監管</translation>
    </message>
    <message>
        <source>Language</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Reset Settings</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Are you sure you want to review the training guide?</source>
        <translation type="unfinished">您確定要觀看使用教學嗎？</translation>
    </message>
    <message>
        <source>Review</source>
        <translation type="unfinished">回顧</translation>
    </message>
    <message>
        <source>Select a language</source>
        <translation type="unfinished">選擇語言</translation>
    </message>
    <message>
        <source>Wake-Up Behavior</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Interactivity Timeout</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Apply a custom timeout for settings UI.
This is the time after which settings UI closes automatically if user is not interacting with the screen.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Reboot</source>
        <translation type="unfinished">重新啟動</translation>
    </message>
    <message>
        <source>Power Off</source>
        <translation type="unfinished">關機</translation>
    </message>
    <message>
        <source>Offroad Mode</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Are you sure you want to exit Always Offroad mode?</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Confirm</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Are you sure you want to enter Always Offroad mode?</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Disengage to Enter Always Offroad Mode</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Are you sure you want to reset all sunnypilot settings to default? Once the settings are reset, there is no going back.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Reset</source>
        <translation type="unfinished">重設</translation>
    </message>
    <message>
        <source>The reset cannot be undone. You have been warned.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Exit Always Offroad</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Always Offroad</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>⁍ Default: Device will boot/wake-up normally &amp; will be ready to engage.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>⁍ Offroad: Device will be in Always Offroad mode after boot/wake-up.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Controls state of the device after boot/sleep.</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>DriveStats</name>
    <message>
        <source>Drives</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Hours</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>ALL TIME</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>PAST WEEK</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>KM</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Miles</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>DriverViewWindow</name>
    <message>
        <source>camera starting</source>
        <translation>開啟相機中</translation>
    </message>
</context>
<context>
    <name>ExitOffroadButton</name>
    <message>
        <source>Are you sure you want to exit Always Offroad mode?</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Confirm</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>EXIT ALWAYS OFFROAD MODE</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>ExperimentalModeButton</name>
    <message>
        <source>EXPERIMENTAL MODE ON</source>
        <translation>實驗模式 ON</translation>
    </message>
    <message>
        <source>CHILL MODE ON</source>
        <translation>輕鬆模式 ON</translation>
    </message>
</context>
<context>
    <name>FirehosePanel</name>
    <message>
        <source>Firehose Mode: ACTIVE</source>
        <translation>Firehose 模式：啟用中</translation>
    </message>
    <message>
        <source>ACTIVE</source>
        <translation>啟用中</translation>
    </message>
    <message numerus="yes">
        <source>&lt;b&gt;%n segment(s)&lt;/b&gt; of your driving is in the training dataset so far.</source>
        <translation>
            <numerusform>&lt;b&gt;目前已有 %n 段&lt;/b&gt; 您的駕駛數據被納入訓練資料集。</numerusform>
        </translation>
    </message>
    <message>
        <source>&lt;span stylesheet=&apos;font-size: 60px; font-weight: bold; color: #e74c3c;&apos;&gt;INACTIVE&lt;/span&gt;: connect to an unmetered network</source>
        <translation>&lt;span stylesheet=&apos;font-size: 60px; font-weight: bold; color: #e74c3c;&apos;&gt;閒置中&lt;/span&gt;：請連接到不按流量計費的網絡</translation>
    </message>
    <message>
        <source>Firehose Mode</source>
        <translation>Firehose 模式</translation>
    </message>
    <message>
        <source>sunnypilot learns to drive by watching humans, like you, drive.

Firehose Mode allows you to maximize your training data uploads to improve openpilot&apos;s driving models. More data means bigger models, which means better Experimental Mode.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>For maximum effectiveness, bring your device inside and connect to a good USB-C adapter and Wi-Fi weekly.&lt;br&gt;&lt;br&gt;Firehose Mode can also work while you&apos;re driving if connected to a hotspot or unlimited SIM card.&lt;br&gt;&lt;br&gt;&lt;br&gt;&lt;b&gt;Frequently Asked Questions&lt;/b&gt;&lt;br&gt;&lt;br&gt;&lt;i&gt;Does it matter how or where I drive?&lt;/i&gt; Nope, just drive as you normally would.&lt;br&gt;&lt;br&gt;&lt;i&gt;Do all of my segments get pulled in Firehose Mode?&lt;/i&gt; No, we selectively pull a subset of your segments.&lt;br&gt;&lt;br&gt;&lt;i&gt;What&apos;s a good USB-C adapter?&lt;/i&gt; Any fast phone or laptop charger should be fine.&lt;br&gt;&lt;br&gt;&lt;i&gt;Does it matter which software I run?&lt;/i&gt; Yes, only upstream sunnypilot (and particular forks) are able to be used for training.</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>HudRenderer</name>
    <message>
        <source>km/h</source>
        <translation>km/h</translation>
    </message>
    <message>
        <source>mph</source>
        <translation>mph</translation>
    </message>
    <message>
        <source>MAX</source>
        <translation>最高</translation>
    </message>
</context>
<context>
    <name>HyundaiSettings</name>
    <message>
        <source>Off</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Dynamic</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Predictive</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Custom Longitudinal Tuning</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>This feature can only be used with openpilot longitudinal control enabled.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Enable &quot;Always Offroad&quot; in Device panel, or turn vehicle off to select an option.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Off: Uses default tuning</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Dynamic: Adjusts acceleration limits based on current speed</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Predictive: Uses future trajectory data to anticipate needed adjustments</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Fine-tune your driving experience by adjusting acceleration smoothness with openpilot longitudinal control.</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>InputDialog</name>
    <message>
        <source>Cancel</source>
        <translation>取消</translation>
    </message>
    <message numerus="yes">
        <source>Need at least %n character(s)!</source>
        <translation>
            <numerusform>需要至少 %n 個字元！</numerusform>
        </translation>
    </message>
</context>
<context>
    <name>LaneChangeSettings</name>
    <message>
        <source>Back</source>
        <translation type="unfinished">回上頁</translation>
    </message>
    <message>
        <source>Auto Lane Change: Delay with Blind Spot</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Toggle to enable a delay timer for seamless lane changes when blind spot monitoring (BSM) detects a obstructing vehicle, ensuring safe maneuvering.</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>LateralPanel</name>
    <message>
        <source>Modular Assistive Driving System (MADS)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Enable the beloved MADS feature. Disable toggle to revert back to stock sunnypilot engagement/disengagement.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Customize MADS</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Customize Lane Change</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Pause Lateral Control with Blinker</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Pause lateral control with blinker when traveling below the desired speed selected.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Enables independent engagements of Automatic Lane Centering (ALC) and Adaptive Cruise Control (ACC).</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Start the vehicle to check vehicle compatibility.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>This platform supports all MADS settings.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>This platform supports limited MADS settings.</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>LongitudinalPanel</name>
    <message>
        <source>Custom ACC Speed Increments</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Enable custom Short &amp; Long press increments for cruise speed increase/decrease.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>This feature can only be used with openpilot longitudinal control enabled.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>This feature is not supported on this platform due to vehicle limitations.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Start the vehicle to check vehicle compatibility.</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>MadsSettings</name>
    <message>
        <source>Toggle with Main Cruise</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Unified Engagement Mode (UEM)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Steering Mode on Brake Pedal</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Note: For vehicles without LFA/LKAS button, disabling this will prevent lateral control engagement.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Engage lateral and longitudinal control with cruise control engagement.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Note: Once lateral control is engaged via UEM, it will remain engaged until it is manually disabled via the MADS button or car shut off.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Start the vehicle to check vehicle compatibility.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>This feature defaults to OFF, and does not allow selection due to vehicle limitations.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>This feature defaults to ON, and does not allow selection due to vehicle limitations.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>This platform only supports Disengage mode due to vehicle limitations.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Remain Active</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Remain Active: ALC will remain active when the brake pedal is pressed.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Pause</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Pause: ALC will pause when the brake pedal is pressed.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Disengage</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Disengage: ALC will disengage when the brake pedal is pressed.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Choose how Automatic Lane Centering (ALC) behaves after the brake pedal is manually pressed in sunnypilot.</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>MaxTimeOffroad</name>
    <message>
        <source>Max Time Offroad</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Device will automatically shutdown after set time once the engine is turned off.&lt;br/&gt;(30h is the default)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Always On</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>h</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>m</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source> (default)</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>ModelsPanel</name>
    <message>
        <source>Current Model</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>SELECT</source>
        <translation type="unfinished">選取</translation>
    </message>
    <message>
        <source>Clear Model Cache</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>CLEAR</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Driving Model</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Navigation Model</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Vision Model</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Policy Model</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Live Learning Steer Delay</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Adjust Software Delay</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Adjust the software delay when Live Learning Steer Delay is toggled off.
The default software delay value is 0.2</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>  %1 - %2</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>downloaded</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>ready</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>from cache</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>  download failed - %1</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>  pending - %1</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Fetching models...</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Select a Model</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Default</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Model download has started in the background.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>We STRONGLY suggest you to reset calibration.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Would you like to do that now?</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Reset Calibration</source>
        <translation type="unfinished">重設校準</translation>
    </message>
    <message>
        <source>Driving Model Selector</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>This will delete ALL downloaded models from the cache&lt;br/&gt;&lt;u&gt;except the currently active model&lt;/u&gt;.&lt;br/&gt;&lt;br/&gt;Are you sure you want to continue?</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Clear Cache</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Warning: You are on a metered connection!</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Continue</source>
        <translation type="unfinished">繼續</translation>
    </message>
    <message>
        <source>on Metered</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Cancel</source>
        <translation type="unfinished">取消</translation>
    </message>
    <message>
        <source>Refresh Model List</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>REFRESH</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Fetching Latest Models</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Enable this for the car to learn and adapt its steering response time. Disable to use a fixed steering response time. Keeping this on provides the stock openpilot experience.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Live Steer Delay:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Actuator Delay:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Software Delay:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Total Delay:</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>MultiOptionDialog</name>
    <message>
        <source>Select</source>
        <translation>選擇</translation>
    </message>
    <message>
        <source>Cancel</source>
        <translation>取消</translation>
    </message>
</context>
<context>
    <name>Networking</name>
    <message>
        <source>Advanced</source>
        <translation>進階</translation>
    </message>
    <message>
        <source>Enter password</source>
        <translation>輸入密碼</translation>
    </message>
    <message>
        <source>for &quot;%1&quot;</source>
        <translation>給 &quot;%1&quot;</translation>
    </message>
    <message>
        <source>Wrong password</source>
        <translation>密碼錯誤</translation>
    </message>
</context>
<context>
    <name>NetworkingSP</name>
    <message>
        <source>Scan</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Scanning...</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>NeuralNetworkLateralControl</name>
    <message>
        <source>Neural Network Lateral Control (NNLC)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>NNLC is currently not available on this platform.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Start the car to check car compatibility</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>NNLC Not Loaded</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>NNLC Loaded</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Match</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Exact</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Fuzzy</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Match: &quot;Exact&quot; is ideal, but &quot;Fuzzy&quot; is fine too.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Formerly known as &lt;b&gt;&quot;NNFF&quot;&lt;/b&gt;, this replaces the lateral &lt;b&gt;&quot;torque&quot;&lt;/b&gt; controller, with one using a neural network trained on each car&apos;s (actually, each separate EPS firmware) driving data for increased controls accuracy.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Reach out to the sunnypilot team in the following channel at the sunnypilot Discord server</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>with feedback, or to provide log data for your car if your car is currently unsupported:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>if there are any issues:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>and donate logs to get NNLC loaded for your car:</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>OffroadAlert</name>
    <message>
        <source>Unable to download updates
%1</source>
        <translation>無法下載更新
%1</translation>
    </message>
    <message>
        <source>Taking camera snapshots. System won&apos;t start until finished.</source>
        <translation>正在使用相機拍攝中。在完成之前，系統將無法啟動。</translation>
    </message>
    <message>
        <source>An update to your device&apos;s operating system is downloading in the background. You will be prompted to update when it&apos;s ready to install.</source>
        <translation>一個有關操作系統的更新正在後台下載中。當更新準備好安裝時，您將收到提示進行更新。</translation>
    </message>
    <message>
        <source>NVMe drive not mounted.</source>
        <translation>NVMe 固態硬碟未被掛載。</translation>
    </message>
    <message>
        <source>Device temperature too high. System cooling down before starting. Current internal component temperature: %1</source>
        <translation>裝置溫度過高。系統正在冷卻中，等冷卻完畢後才會啟動。目前內部組件溫度：%1</translation>
    </message>
    <message>
        <source>Device failed to register with the comma.ai backend. It will not connect or upload to comma.ai servers, and receives no support from comma.ai. If this is a device purchased at comma.ai/shop, open a ticket at https://comma.ai/support.</source>
        <translation>裝置註冊 comma.ai 後端失敗。此裝置將無法連線或上傳資料至 comma.ai 伺服器，也無法獲得 comma.ai 的支援。若此裝置購自 comma.ai/shop，請至 https://comma.ai/support 建立支援請求。</translation>
    </message>
    <message>
        <source>Acknowledge Excessive Actuation</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Snooze Update</source>
        <translation type="unfinished">暫停更新</translation>
    </message>
    <message>
        <source>openpilot detected excessive %1 actuation on your last drive. Please contact support at https://comma.ai/support and share your device&apos;s Dongle ID for troubleshooting.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Immediately connect to the internet to check for updates. If you do not connect to the internet, sunnypilot won&apos;t engage in %1</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Connect to internet to check for updates. sunnypilot won&apos;t automatically start until it connects to internet to check for updates.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>sunnypilot was unable to identify your car. Your car is either unsupported or its ECUs are not recognized. Please submit a pull request to add the firmware versions to the proper vehicle. Need help? Join discord.comma.ai.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>sunnypilot detected a change in the device&apos;s mounting position. Ensure the device is fully seated in the mount and the mount is firmly secured to the windshield.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>OpenStreetMap database is out of date. New maps must be downloaded if you wish to continue using OpenStreetMap data for Enhanced Speed Control and road name display.

%1</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>OffroadHome</name>
    <message>
        <source>UPDATE</source>
        <translation>更新</translation>
    </message>
    <message>
        <source> ALERTS</source>
        <translation> 提醒</translation>
    </message>
    <message>
        <source> ALERT</source>
        <translation> 提醒</translation>
    </message>
</context>
<context>
    <name>OffroadHomeSP</name>
    <message>
        <source>ALWAYS OFFROAD ACTIVE</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>OnroadAlerts</name>
    <message>
        <source>TAKE CONTROL IMMEDIATELY</source>
        <translation>立即接管</translation>
    </message>
    <message>
        <source>Reboot Device</source>
        <translation>請重新啟裝置</translation>
    </message>
    <message>
        <source>Waiting to start</source>
        <translation>等待開始</translation>
    </message>
    <message>
        <source>System Unresponsive</source>
        <translation>系統無回應</translation>
    </message>
    <message>
        <source>sunnypilot Unavailable</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>OsmPanel</name>
    <message>
        <source>Mapd Version</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Offline Maps ETA</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Time Elapsed</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Downloaded Maps</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>DELETE</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>This will delete ALL downloaded maps

Are you sure you want to delete all the maps?</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Yes, delete all the maps.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Database Update</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>CHECK</source>
        <translation type="unfinished">檢查</translation>
    </message>
    <message>
        <source>Country</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>SELECT</source>
        <translation type="unfinished">選取</translation>
    </message>
    <message>
        <source>Fetching Country list...</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>State</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Fetching State list...</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>All</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>REFRESH</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>UPDATE</source>
        <translation type="unfinished">更新</translation>
    </message>
    <message>
        <source>Download starting...</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Error: Invalid download. Retry.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Download complete!</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>

Warning: You are on a metered connection!</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>This will start the download process and it might take a while to complete.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Continue on Metered</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Start Download</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>m </source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>s</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Calculating...</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Downloaded</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Calculating ETA...</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Ready</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Time remaining: </source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>PairingPopup</name>
    <message>
        <source>Pair your device to your comma account</source>
        <translation>將裝置與您的 comma 帳號配對</translation>
    </message>
    <message>
        <source>Go to https://connect.comma.ai on your phone</source>
        <translation>用手機連至 https://connect.comma.ai</translation>
    </message>
    <message>
        <source>Click &quot;add new device&quot; and scan the QR code on the right</source>
        <translation>點選 &quot;add new device&quot; 後掃描右邊的二維碼</translation>
    </message>
    <message>
        <source>Bookmark connect.comma.ai to your home screen to use it like an app</source>
        <translation>將 connect.comma.ai 加入您的主螢幕，以便像手機 App 一樣使用它</translation>
    </message>
    <message>
        <source>Please connect to Wi-Fi to complete initial pairing</source>
        <translation>請連接 Wi-Fi 以完成初始配對</translation>
    </message>
</context>
<context>
    <name>ParamControl</name>
    <message>
        <source>Cancel</source>
        <translation>取消</translation>
    </message>
    <message>
        <source>Enable</source>
        <translation>啟用</translation>
    </message>
</context>
<context>
    <name>ParamControlSP</name>
    <message>
        <source>Enable</source>
        <translation type="unfinished">啟用</translation>
    </message>
    <message>
        <source>Cancel</source>
        <translation type="unfinished">取消</translation>
    </message>
</context>
<context>
    <name>PlatformSelector</name>
    <message>
        <source>Vehicle</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>SEARCH</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Search your vehicle</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Enter model year (e.g., 2021) and model name (Toyota Corolla):</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>SEARCHING</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>REMOVE</source>
        <translation type="unfinished">移除</translation>
    </message>
    <message>
        <source>This setting will take effect immediately.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>This setting will take effect once the device enters offroad state.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Vehicle Selector</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Confirm</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Cancel</source>
        <translation type="unfinished">取消</translation>
    </message>
    <message>
        <source>No vehicles found for query: %1</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Select a vehicle</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Unrecognized Vehicle</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Fingerprinted automatically</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Manually selected</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Not fingerprinted or manually selected</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Select vehicle to force fingerprint manually.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Colors represent fingerprint status:</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>PrimeAdWidget</name>
    <message>
        <source>Upgrade Now</source>
        <translation>馬上升級</translation>
    </message>
    <message>
        <source>Become a comma prime member at connect.comma.ai</source>
        <translation>成為 connect.comma.ai 的高級會員</translation>
    </message>
    <message>
        <source>PRIME FEATURES:</source>
        <translation>高級會員特點：</translation>
    </message>
    <message>
        <source>Remote access</source>
        <translation>遠端存取</translation>
    </message>
    <message>
        <source>24/7 LTE connectivity</source>
        <translation>24/7 LTE 連線</translation>
    </message>
    <message>
        <source>1 year of drive storage</source>
        <translation>一年的行駛記錄儲存空間</translation>
    </message>
    <message>
        <source>Remote snapshots</source>
        <translation>遠端快照</translation>
    </message>
</context>
<context>
    <name>PrimeUserWidget</name>
    <message>
        <source>✓ SUBSCRIBED</source>
        <translation>✓ 已訂閱</translation>
    </message>
    <message>
        <source>comma prime</source>
        <translation>comma 高級會員</translation>
    </message>
</context>
<context>
    <name>QObject</name>
    <message numerus="yes">
        <source>%n minute(s) ago</source>
        <translation>
            <numerusform>%n 分鐘前</numerusform>
        </translation>
    </message>
    <message numerus="yes">
        <source>%n hour(s) ago</source>
        <translation>
            <numerusform>%n 小時前</numerusform>
        </translation>
    </message>
    <message numerus="yes">
        <source>%n day(s) ago</source>
        <translation>
            <numerusform>%n 天前</numerusform>
        </translation>
    </message>
    <message>
        <source>now</source>
        <translation>現在</translation>
    </message>
    <message>
        <source>sunnypilot</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>SettingsWindow</name>
    <message>
        <source>×</source>
        <translation>×</translation>
    </message>
    <message>
        <source>Device</source>
        <translation>裝置</translation>
    </message>
    <message>
        <source>Network</source>
        <translation>網路</translation>
    </message>
    <message>
        <source>Toggles</source>
        <translation>設定</translation>
    </message>
    <message>
        <source>Software</source>
        <translation>軟體</translation>
    </message>
    <message>
        <source>Developer</source>
        <translation>開發人員</translation>
    </message>
    <message>
        <source>Firehose</source>
        <translation>Firehose</translation>
    </message>
</context>
<context>
    <name>SettingsWindowSP</name>
    <message>
        <source>×</source>
        <translation type="unfinished">×</translation>
    </message>
    <message>
        <source>Device</source>
        <translation type="unfinished">裝置</translation>
    </message>
    <message>
        <source>Network</source>
        <translation type="unfinished">網路</translation>
    </message>
    <message>
        <source>sunnylink</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Toggles</source>
        <translation type="unfinished">設定</translation>
    </message>
    <message>
        <source>Software</source>
        <translation type="unfinished">軟體</translation>
    </message>
    <message>
        <source>Models</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Steering</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Cruise</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Visuals</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>OSM</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Trips</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Vehicle</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Firehose</source>
        <translation type="unfinished">Firehose</translation>
    </message>
    <message>
        <source>Developer</source>
        <translation type="unfinished">開發人員</translation>
    </message>
</context>
<context>
    <name>SetupWidget</name>
    <message>
        <source>Finish Setup</source>
        <translation>完成設置</translation>
    </message>
    <message>
        <source>Pair your device with comma connect (connect.comma.ai) and claim your comma prime offer.</source>
        <translation>將您的裝置與 comma connect (connect.comma.ai) 配對並領取您的 comma 高級會員優惠。</translation>
    </message>
    <message>
        <source>Pair device</source>
        <translation>配對裝置</translation>
    </message>
</context>
<context>
    <name>Sidebar</name>
    <message>
        <source>CONNECT</source>
        <translation>雲端服務</translation>
    </message>
    <message>
        <source>OFFLINE</source>
        <translation>已離線</translation>
    </message>
    <message>
        <source>ONLINE</source>
        <translation>已連線</translation>
    </message>
    <message>
        <source>ERROR</source>
        <translation>錯誤</translation>
    </message>
    <message>
        <source>TEMP</source>
        <translation>溫度</translation>
    </message>
    <message>
        <source>HIGH</source>
        <translation>偏高</translation>
    </message>
    <message>
        <source>GOOD</source>
        <translation>正常</translation>
    </message>
    <message>
        <source>OK</source>
        <translation>一般</translation>
    </message>
    <message>
        <source>VEHICLE</source>
        <translation>車輛通訊</translation>
    </message>
    <message>
        <source>NO</source>
        <translation>未連線</translation>
    </message>
    <message>
        <source>PANDA</source>
        <translation>車輛通訊</translation>
    </message>
    <message>
        <source>--</source>
        <translation>--</translation>
    </message>
    <message>
        <source>Wi-Fi</source>
        <translation>Wi-Fi</translation>
    </message>
    <message>
        <source>ETH</source>
        <translation>ETH</translation>
    </message>
    <message>
        <source>2G</source>
        <translation>2G</translation>
    </message>
    <message>
        <source>3G</source>
        <translation>3G</translation>
    </message>
    <message>
        <source>LTE</source>
        <translation>LTE</translation>
    </message>
    <message>
        <source>5G</source>
        <translation>5G</translation>
    </message>
</context>
<context>
    <name>SidebarSP</name>
    <message>
        <source>DISABLED</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>OFFLINE</source>
        <translation type="unfinished">已離線</translation>
    </message>
    <message>
        <source>REGIST...</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>ONLINE</source>
        <translation type="unfinished">已連線</translation>
    </message>
    <message>
        <source>ERROR</source>
        <translation type="unfinished">錯誤</translation>
    </message>
    <message>
        <source>SUNNYLINK</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>SoftwarePanel</name>
    <message>
        <source>Updates are only downloaded while the car is off.</source>
        <translation>系統更新只會在熄火時下載。</translation>
    </message>
    <message>
        <source>Current Version</source>
        <translation>當前版本</translation>
    </message>
    <message>
        <source>Download</source>
        <translation>下載</translation>
    </message>
    <message>
        <source>Install Update</source>
        <translation>安裝更新</translation>
    </message>
    <message>
        <source>INSTALL</source>
        <translation>安裝</translation>
    </message>
    <message>
        <source>Target Branch</source>
        <translation>目標分支</translation>
    </message>
    <message>
        <source>SELECT</source>
        <translation>選取</translation>
    </message>
    <message>
        <source>Select a branch</source>
        <translation>選取一個分支</translation>
    </message>
    <message>
        <source>UNINSTALL</source>
        <translation>解除安裝</translation>
    </message>
    <message>
        <source>Uninstall %1</source>
        <translation>解除安裝 %1</translation>
    </message>
    <message>
        <source>Are you sure you want to uninstall?</source>
        <translation>您確定您要解除安裝嗎？</translation>
    </message>
    <message>
        <source>CHECK</source>
        <translation>檢查</translation>
    </message>
    <message>
        <source>Uninstall</source>
        <translation>解除安裝</translation>
    </message>
    <message>
        <source>failed to check for update</source>
        <translation>檢查更新失敗</translation>
    </message>
    <message>
        <source>up to date, last checked %1</source>
        <translation>已經是最新版本，上次檢查時間為 %1</translation>
    </message>
    <message>
        <source>DOWNLOAD</source>
        <translation>下載</translation>
    </message>
    <message>
        <source>update available</source>
        <translation>有可用的更新</translation>
    </message>
    <message>
        <source>never</source>
        <translation>從未更新</translation>
    </message>
</context>
<context>
    <name>SoftwarePanelSP</name>
    <message>
        <source>Search Branch</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Enter search keywords, or leave blank to list all branches.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Disable Updates</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>When enabled, software updates will be disabled. &lt;b&gt;This requires a reboot to take effect.&lt;/b&gt;</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>No branches found for keywords: %1</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Select a branch</source>
        <translation type="unfinished">選取一個分支</translation>
    </message>
    <message>
        <source>%1 updates requires a reboot.&lt;br&gt;Reboot now?</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Reboot</source>
        <translation type="unfinished">重新啟動</translation>
    </message>
    <message>
        <source>When enabled, software updates will be disabled.&lt;br&gt;&lt;b&gt;This requires a reboot to take effect.&lt;/b&gt;</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Please enable always offroad mode or turn off vehicle to adjust these toggles</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>SshControl</name>
    <message>
        <source>SSH Keys</source>
        <translation>SSH 金鑰</translation>
    </message>
    <message>
        <source>Warning: This grants SSH access to all public keys in your GitHub settings. Never enter a GitHub username other than your own. A comma employee will NEVER ask you to add their GitHub username.</source>
        <translation>警告：這將授權給 GitHub 帳號中所有公鑰 SSH 訪問權限。切勿輸入非您自己的 GitHub 使用者名稱。comma 員工「永遠不會」要求您添加他們的 GitHub 使用者名稱。</translation>
    </message>
    <message>
        <source>ADD</source>
        <translation>新增</translation>
    </message>
    <message>
        <source>Enter your GitHub username</source>
        <translation>請輸入您 GitHub 的使用者名稱</translation>
    </message>
    <message>
        <source>LOADING</source>
        <translation>載入中</translation>
    </message>
    <message>
        <source>REMOVE</source>
        <translation>移除</translation>
    </message>
    <message>
        <source>Username &apos;%1&apos; has no keys on GitHub</source>
        <translation>GitHub 用戶 &apos;%1&apos; 沒有設定任何金鑰</translation>
    </message>
    <message>
        <source>Request timed out</source>
        <translation>請求超時</translation>
    </message>
    <message>
        <source>Username &apos;%1&apos; doesn&apos;t exist on GitHub</source>
        <translation>GitHub 用戶 &apos;%1&apos; 不存在</translation>
    </message>
</context>
<context>
    <name>SshToggle</name>
    <message>
        <source>Enable SSH</source>
        <translation>啟用 SSH 服務</translation>
    </message>
</context>
<context>
    <name>SunnylinkPanel</name>
    <message>
        <source>This is the master switch, it will allow you to cutoff any sunnylink requests should you want to do that.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Enable sunnylink</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Sponsor Status</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>SPONSOR</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Become a sponsor of sunnypilot to get early access to sunnylink features when they become available.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Pair GitHub Account</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>PAIR</source>
        <translation type="unfinished">配對</translation>
    </message>
    <message>
        <source>Pair your GitHub account to grant your device sponsor benefits, including API access on sunnylink.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>N/A</source>
        <translation type="unfinished">無法使用</translation>
    </message>
    <message>
        <source>sunnylink Dongle ID not found. This may be due to weak internet connection or sunnylink registration issue. Please reboot and try again.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>🎉Welcome back! We&apos;re excited to see you&apos;ve enabled sunnylink again! 🚀</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>👋Not going to lie, it&apos;s sad to see you disabled sunnylink 😢, but we&apos;ll be here when you&apos;re ready to come back 🎉.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Backup Settings</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Are you sure you want to backup sunnypilot settings?</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Back Up</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Restore Settings</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Are you sure you want to restore the last backed up sunnypilot settings?</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Restore</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Backup in progress %1%</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Backup Failed</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Settings backup completed.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Restore in progress %1%</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Restore Failed</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Unable to restore the settings, try again later.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Settings restored. Confirm to restart the interface.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Device ID</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>THANKS ♥</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Not Sponsor</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Paired</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Not Paired</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Enable sunnylink uploader to allow sunnypilot to upload your driving data to sunnypilot servers. (only for highest tiers, and does NOT bring ANY benefit to you. We are just testing data volume.)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>[Don&apos;t use] Enable sunnylink uploader</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>🚀 sunnylink 🚀</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>For secure backup, restore, and remote configuration</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Sponsorship isn&apos;t required for basic backup/restore</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Click the sponsor button for more details</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>SunnylinkSponsorPopup</name>
    <message>
        <source>Scan the QR code to login to your GitHub account</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Follow the prompts to complete the pairing process</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Re-enter the &quot;sunnylink&quot; panel to verify sponsorship status</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>If sponsorship status was not updated, please contact a moderator on Discord at https://discord.gg/sunnypilot</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Scan the QR code to visit sunnyhaibin&apos;s GitHub Sponsors page</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Choose your sponsorship tier and confirm your support</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Join our community on Discord at https://discord.gg/sunnypilot and reach out to a moderator to confirm your sponsor status</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Pair your GitHub account</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Early Access: Become a sunnypilot Sponsor</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>TermsPage</name>
    <message>
        <source>Decline</source>
        <translation>拒絕</translation>
    </message>
    <message>
        <source>Agree</source>
        <translation>接受</translation>
    </message>
    <message>
        <source>Welcome to sunnypilot</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>You must accept the Terms and Conditions to use sunnypilot. Read the latest terms at &lt;span style=&apos;color: #465BEA;&apos;&gt;https://comma.ai/terms&lt;/span&gt; before continuing.</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>TogglesPanel</name>
    <message>
        <source>Enable Lane Departure Warnings</source>
        <translation>啟用車道偏離警告</translation>
    </message>
    <message>
        <source>Receive alerts to steer back into the lane when your vehicle drifts over a detected lane line without a turn signal activated while driving over 31 mph (50 km/h).</source>
        <translation>車速在時速 50 公里 (31 英里) 以上且未打方向燈的情況下，如果偵測到車輛駛出目前車道線時，發出車道偏離警告。</translation>
    </message>
    <message>
        <source>Use Metric System</source>
        <translation>使用公制單位</translation>
    </message>
    <message>
        <source>Display speed in km/h instead of mph.</source>
        <translation>啟用後，速度單位顯示將從 mp/h 改為 km/h。</translation>
    </message>
    <message>
        <source>Record and Upload Driver Camera</source>
        <translation>記錄並上傳駕駛監控影像</translation>
    </message>
    <message>
        <source>Upload data from the driver facing camera and help improve the driver monitoring algorithm.</source>
        <translation>上傳駕駛監控的錄影來協助我們提升駕駛監控的準確率。</translation>
    </message>
    <message>
        <source>Disengage on Accelerator Pedal</source>
        <translation>油門取消控車</translation>
    </message>
    <message>
        <source>Experimental Mode</source>
        <translation>實驗模式</translation>
    </message>
    <message>
        <source>New Driving Visualization</source>
        <translation>新的駕駛視覺介面</translation>
    </message>
    <message>
        <source>Experimental mode is currently unavailable on this car since the car&apos;s stock ACC is used for longitudinal control.</source>
        <translation>因車輛使用內建ACC系統，無法在本車輛上啟動實驗模式。</translation>
    </message>
    <message>
        <source>openpilot longitudinal control may come in a future update.</source>
        <translation>openpilot 縱向控制可能會在未來的更新中提供。</translation>
    </message>
    <message>
        <source>Aggressive</source>
        <translation>積極</translation>
    </message>
    <message>
        <source>Standard</source>
        <translation>標準</translation>
    </message>
    <message>
        <source>Relaxed</source>
        <translation>舒適</translation>
    </message>
    <message>
        <source>Driving Personality</source>
        <translation>駕駛風格</translation>
    </message>
    <message>
        <source>End-to-End Longitudinal Control</source>
        <translation>端到端縱向控制</translation>
    </message>
    <message>
        <source>The driving visualization will transition to the road-facing wide-angle camera at low speeds to better show some turns. The Experimental mode logo will also be shown in the top right corner.</source>
        <translation>在低速時，駕駛可視化將切換至道路朝向的廣角攝影機，以更好地顯示某些彎道。在右上角還會顯示「實驗模式」的標誌。</translation>
    </message>
    <message>
        <source>Always-On Driver Monitoring</source>
        <translation>駕駛監控常開</translation>
    </message>
    <message>
        <source> Changing this setting will restart openpilot if the car is powered on.</source>
        <translation> 若車輛電源為開啟狀態，變更此設定將會重新啟動 openpilot。</translation>
    </message>
    <message>
        <source>Record and Upload Microphone Audio</source>
        <translation>錄製並上傳麥克風音訊</translation>
    </message>
    <message>
        <source>Record and store microphone audio while driving. The audio will be included in the dashcam video in comma connect.</source>
        <translation>在駕駛時錄製並儲存麥克風音訊。此音訊將會收錄在 comma connect 的行車記錄器影片中。</translation>
    </message>
    <message>
        <source>Enable sunnypilot</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Use the sunnypilot system for adaptive cruise control and lane keep driver assistance. Your attention is required at all times to use this feature.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Enable Dynamic Experimental Control</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Enable toggle to allow the model to determine when to use sunnypilot ACC or sunnypilot End to End Longitudinal.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>When enabled, pressing the accelerator pedal will disengage sunnypilot.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Enable driver monitoring even when sunnypilot is not engaged.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Standard is recommended. In aggressive mode, sunnypilot will follow lead cars closer and be more aggressive with the gas and brake. In relaxed mode sunnypilot will stay further away from lead cars. On supported cars, you can cycle through these personalities with your steering wheel distance button.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>sunnypilot defaults to driving in &lt;b&gt;chill mode&lt;/b&gt;. Experimental mode enables &lt;b&gt;alpha-level features&lt;/b&gt; that aren&apos;t ready for chill mode. Experimental features are listed below:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Let the driving model control the gas and brakes. sunnypilot will drive as it thinks a human would, including stopping for red lights and stop signs. Since the driving model decides the speed to drive, the set speed will only act as an upper bound. This is an alpha quality feature; mistakes should be expected.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>An alpha version of sunnypilot longitudinal control can be tested, along with Experimental mode, on non-release branches.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Enable the sunnypilot longitudinal control (alpha) toggle to allow Experimental mode.</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>TreeOptionDialog</name>
    <message>
        <source>Select</source>
        <translation type="unfinished">選擇</translation>
    </message>
    <message>
        <source>Cancel</source>
        <translation type="unfinished">取消</translation>
    </message>
</context>
<context>
    <name>VisualsPanel</name>
    <message>
        <source>Show Blind Spot Warnings</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Enabling this will display warnings when a vehicle is detected in your blind spot as long as your car has BSM supported.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source> Changing this setting will restart openpilot if the car is powered on.</source>
        <translation type="unfinished"> 若車輛電源為開啟狀態，變更此設定將會重新啟動 openpilot。</translation>
    </message>
    <message>
        <source>Off</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Distance</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Speed</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Time</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>All</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Display Metrics Below Chevron</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Display useful metrics below the chevron that tracks the lead car (only applicable to cars with openpilot longitudinal control).</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>WiFiPromptWidget</name>
    <message>
        <source>Open</source>
        <translation>開啟</translation>
    </message>
    <message>
        <source>Maximize your training data uploads to improve openpilot&apos;s driving models.</source>
        <translation>最大化您的訓練數據上傳，以改善 openpilot 的駕駛模型。</translation>
    </message>
    <message>
        <source>&lt;span style=&apos;font-family: &quot;Noto Color Emoji&quot;;&apos;&gt;🔥&lt;/span&gt; Firehose Mode &lt;span style=&apos;font-family: Noto Color Emoji;&apos;&gt;🔥&lt;/span&gt;</source>
        <translation>&lt;span style=&apos;font-family: &quot;Noto Color Emoji&quot;;&apos;&gt;🔥&lt;/span&gt; Firehose 模式 &lt;span style=&apos;font-family: Noto Color Emoji;&apos;&gt;🔥&lt;/span&gt;</translation>
    </message>
</context>
<context>
    <name>WifiUI</name>
    <message>
        <source>Scanning for networks...</source>
        <translation>掃描無線網路中...</translation>
    </message>
    <message>
        <source>CONNECTING...</source>
        <translation>連線中...</translation>
    </message>
    <message>
        <source>FORGET</source>
        <translation>清除</translation>
    </message>
    <message>
        <source>Forget Wi-Fi Network &quot;%1&quot;?</source>
        <translation>清除 Wi-Fi 網路 &quot;%1&quot;?</translation>
    </message>
    <message>
        <source>Forget</source>
        <translation>清除</translation>
    </message>
</context>
</TS>